Apro PHANES-HR: SATA III 2.5" SSD SLC Temp -40°C ~ +85°C
| Numéro d'article | Capacité | Description |
| WR7SR008G-PHITI | 8GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR016G-PHITI | 16GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR032G-PHITI | 32GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR064G-PHITI | 64GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR128G-PHITI | 128GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR256G-PHITI | 256GB | SATA III SSD Temp. -40° ~ +85° |
| WR7SR512G-PHITI | 512GB | SATA III SSD Temp. -40° ~ +85° |
General:
- Interface: 7+15pin SATA Interface
- Flash: TOSHIBA SLC NAND Flash Memory ICs
- Form factor: Thin 2.5" housing (7.0mm)
- Capacity: 8GB, 16GB, 32GB, 64GB, 128GB, 256GB, 512GB
Performance:
- Data Transfer Mode: SATA III 6GBit/s. (SATA 3GBit/s. and 1.5GBit/s. compatible)
- Sequential Read: up to 550MB/sec
- Sequential Write: up to 530MB/sec
- IOPS (4KB Random Read QD32): up to 90600
- IOPS (4KB Random Write QD32): up to 89600
- Average Access Time: 0.1ms (approx.)
Environmental Specification:
- Operating temperature: -40°C to +85°C
- Non-Operating Temperature Range: -50°C to +95°C
- Humidity: 10% to 95% (non condensing)
- Acoustic Noise: 0dB
- Vibration: 20G (80Hz to 2KHz, 3 axes)
- Shock: 1,500G (0.5ms, 3 axes)
- Altitude: 70,000 feet
Power Consumption (256GB SSD under +5.0V operation):
- Power Requirements: +5.0V±5%
- Reading Mode: 2.4W (max.)
- Writing Mode: 3.5W (max.)
- Idle Mode: 0.4W (max.)
Reliability:
- MTBF: more than 3,000,000 hours
- ECC: Enhanced Management per 120bits per 2KB block
- Wear-Leveling: global (static and dynamic)
- Bad-Block-Management
- S.M.A.R.T.
- Endurance**: more than 50 years full P/E per day
- Data Retention: up to 10 years without any battery buffer
Physical Specification:
- Weight: 115.0g (metal, max.)
- Dimension: 100.00mm x 69.90mm x 7.00mm